Summary
This article helps users connect their personal devices (Android) to the SD68 BYOD WiFi network.
Audience
This article is intended to be used by SD68 staff with Android devices.
Instructions
Connect to the StaffBYOD WiFi Network
- Tap on the Settings icon
- Select Connections
- Select Wifi
- Select StaffBYOD
- Accept defaults for Phase 2 authentication and CA certificate. If prompted to select EAP method it is PEAP, but usually you just accept the defaults.
- Some of the newer phones you have to select “No certificate specified…” or don’t validate. You may be prompted with “Your connection won’t be private” but that is because we are using our own certificates.
- Enter your username in Identity
- If you have Android 11 or later and are prompted to enter a domain, enter sd68.bc.ca. If there are any issues with your username for identity, enter your email address. With Android 11 or later, If you don’t have Phase 2 authentication None as an option, select MS ChapV2
- Scroll down and enter your Password
- Tap Connect
Forget the StaffBYOD Network
If you are connected and having problems or you have changed your SD68 password select Forget the StaffBYOD network and follow the steps to connect to it again.
- Tap on the Settings icon
- Select Connections
- Select Wifi
- Select StaffBYOD
- Tap on FORGET
- Follow the instructions to Connect to StaffBYOD again.
Additional Help
If you are still experiencing issues after attempting all of the steps outlined above, please contact the SD68 Helpdesk (Link)